Sep 5, 2011

Posted by | 1 Comment

Satellite Direct Software- The Way to Watch Cable Television on the Internet

In the past days, months, and years TV was in its simplest form. Broadcasting was completed live mainly due to the fact the technology for recording programs hadn’t been invented however. Back then, what happened was that a camera caught the action and it transmitted it through an electric current to a TV set. Then, the antenna changed as electrical pulses back into the original images and sound. Here, now, is the way to watch cable Television on the web.

Before, cable TV held the name Community Antenna TV or CATV. Community Antenna TV is actually a technique that enables users to acquire access to TV programs by way of frequency signals which are transmitted to TV sets via coaxial cables or digital light pulses. CATV works in much exactly the same way as the more than the air technique, which utilized television antenna so that you can broadcast television. The difference is that cable TV utilized cables rather than airwaves to be able to send signals. It was within the valleys of Pennsylvania exactly where cable TV was born. For the duration of those times, the only individuals who had TV sets had been those who lived on greater ground, or those that were close towards the source of the program. This is since TV signals back then were in fact transmitted more than radio frequencies that only travel in straight lines. The people of Pennsylvania were come up having a creative answer to their viewing woes. They cleverly set up antennas on the high spots along with the tallest hills to run cables down to their homes to ensure that they could receive the signals clearly.

But then, running cables worked nicely only within short distance and also the signals sent by way of those cables had been subject to interference. The sad fact was that the longer the cable and also the farther the signal had to travel, the weaker it became. Consequently, a fairly distorted image was produced. What they did to remedy this issue was that they installed a series of amplifiers along the way. By putting up 1 amplifier in every one thousand feet distance, the strength of the signal elevated and, in turn, the video top quality enhanced.

Read More
Jun 5, 2011

Posted by | 0 Comments

How to Indentify Satellite Images

The actual time satellite images can make forecasting weather conditions a lot more accurate for the reason that they show precisely what’s happening in any given location. Satellite images show the intensity, speed and direction of storms, permitting a forecaster to give much more accurate details to the locations in front of the storm.

By observing a satellite image, the forecaster can see what modifications are taking place inside the storm program over a time period. If the storm is escalating or breaking apart, changing directions, speeding up or slowing down, this may all become apparent in real time satellite images. This becomes especially beneficial in locations prone to hurricanes or tornados. The satellite images permit forecasters to predict with relative accuracy what locations might have the greatest threat of being hit by an approaching storm, therefore permitting the neighborhood individuals to prepare. A satellite image may also help forecasters ascertain the severity of the approaching storm. They can forecast heavy showers or snow storms, or light rain or flurries based on what the satellite images show. They can also see where severe conditions may possibly be forming with in a larger much less severe program. This information might be utilized for numerous things besides preparing men and women for approaching weather conditions. Have you even seen awesome photos of storms? Satellite images can aid photographers decide where to set up to get some of those extraordinary storms or lightning pictures you have observed. By observing the location of severe weather cells inside storms, photographers are able to determine if they will have a fantastic chance to capture tornado, cloud formation or lightning photos. They are able to also forecast when and where the safest places for taking these photos will most likely be.

Nevertheless, real time satellite images have produced weather forecasting a lot more accurate and valuable than it was not numerous years ago because of the details and amount of details available. Forecasters are able to give the public a considerably better picture of what to expect in the next week, day or hour because of data supplied by satellite images.

Read More
Apr 3, 2011

Posted by | 2 Comments

Satellite VS Cable Subscriptions


Are you seeking for the subscription? Because satellite providers don’t have to disburse taxes levied by local governments and feature smaller infrastructures, consumers obtain more bangs for the buck with satellite. Right now, cable’s low-end price is better, but with a third of the channels it’s not an easy sale when compared to satellite’s lowest package. Cable companies have millions of miles of outdated lines buried below ground, and are in the process of converting their technology to digital, which will be luxurious. While satellite proffers lower programming packages across the board, companies do charge fees per room receiving the signal. Though, some cable companies do, too.

Keep in mind the talk of a 500-channel universe? It’s here, and cable and satellite companies are ready to transport the consumer there. While both proffer similar channel packages, each has an advantage over the other. Satellite offers both east and west coast feeds and interchange sports programming for channels like ESPN and Fox Sports. Sometimes sports stations televise games based on regional interest. Their alternate feed permits the satellite viewer the choice of either game. Of course, accessibility to some of the alternate feeds might entail an additional price.

Cable counters by offering plans for around twenty dollars for those who desire good reception without paying for the 500-channel universe, and local programming not carried by satellite providers like public access stations. Satellite Internet service covers areas where DSL and cable access is unavailable. Satellite proffers less network bandwidth compared to DSL or cable, on the other hand. In addition, the long delays required to transmit data between the satellite and the ground stations tend to generate high network latency, causing a slow performance experience in some cases. Network applications like VPN and online gaming may not function appropriately over satellite Internet connections due to these latency issues. In choosing for the connection that you want to acquire, it is very vital that you know both the features of the providers. In this way, you can assure that you are getting the appropriate connection according to your needs. You need to be very careful in choosing.

Read More
Mar 30, 2011

Posted by | 0 Comments

Find Out Why Use Satellite Internet


There are several reasons why satellite internet is a viable and smart alternative to the traditional form of cable internet. Not everyone will be able to have access to high-speed internet because of the lack of land lines that reach remote areas in the country. The cost to implement high-speed internet to these area is much more than internet service providers are willing to commit to.

While standard dial-up is certainly not the most reliable internet option, it is unfortunately the only option for millions of people in small rural areas that must use dial-up regarding to their internet needs from checking and sending emails as well as watching movies online to chatting with family and friends and even managing their e-commerce business. These uses are often jeopardized due to a slow connection. The best option for many residents relegated to dial-up is satellite internet. Though not specifically catered to just the dial-up only crowd, satellite internet is also a great option to those in urban areas that want something more mobile and less reliant on cable availability should they ever relocate. Though satellite internet connection works by means of a geosynchronous satellite above the Earth that allows constant connection at all hours of the day, there are few instances where satellite internet limitations may occur. Even with some of the drawbacks of satellite internet, the advantages of its high-speed capability still provide more benefits than the slower dial-up option.

Like traditional phone and cable internet, satellite internet lag and latency is a common shortcoming due to factors that involve a signal having to travel around 50,000 miles between every transmission of data. Speed can serve around 500 kbps for downloads and 400 kbps for uploads, but may seem more slowly due to satellite internet delay. Another type of drawback that satellite internet shares with cable internet are the limitations added to the amount of data transferred in a given period. ISPs have thresholds for both uploads and downloads that when exceeded by users will reduce their speeds as a means to balance the congestion and ensure optimum internet performance.

Read More
Mar 13, 2011

Posted by | 0 Comments

The Different Types Of Satellite Dish and Receivers

One of the most important equipments and devices used in transmitting and receiving audio and video signals is satellite dish, which is a useful and sophisticated kind of microwave and parabolic antenna. Satellite dishes come in various models and sizes. People can also classify the equipment based on its special uses. To know more about these devices, it is best to have information or background on the various kinds of satellite dishes.

In fact, the main kind of satellite dish that many industries find consistent and useful, motor-driven dish is positioned on a durable piece of metal that has an aptitude to determine and receive different signals from space. This special receiver uses a proficient stepper motor that controls the position of the dish. In fact, some of the receivers that support the functions of this equipment are Universal Satellite Automatic Location System, Digital Satellite Equipment Control, as well as numerous positioners. Unlike motor-driven dishes, multi-satellite dishes have the capability to receive audio and video signals from various satellite dishes in a single span of time. In addition, the sophisticated design of this technology allows it to receive signals from dishes positioned in different areas without rotating or repositioning the equipment.

On the other hand, the basic function of an ad-hoc satellite dish is to receive audio frequencies. However, the functionality of this equipment can be enhanced if it is used along with a Direct to Home satellite dish. The second type of satellite dish mentioned is usually used only in one place. For those who want to divide a single satellite dish to improve the radio frequencies that they receive, it is great to use Satellite Master Antenna Dishes or also known as Communal Antenna Broadcast Distribution. Lastly, for those who have problems receiving clear audio as well as video signals in their television sets, they can use a Television Receive Only satellite dish. This dish has the capacity to identify frequencies that fixed service satellite sends. Nevertheless, in order to get the signals, the satellite dish should send them in the form of C-band and connect it properly.

Read More
Feb 20, 2011

Posted by | 1 Comment

How to Directly Install a Satellite Dish?

A satellite dish is used to pick up and send out electromagnetic signals, usually relayed by communication satellites orbiting around the earth. It can also be used for data, radio, or television. They come in various sizes and designs and also used to receive satellite television.

A satellite captures satellite television signals that reach a viewer’s house. A regular dish is normally consists of a bowl-shaped surface and a central feed horn. A feed horn is used to guide signals between the transceiver and the reflector. It also filters unwanted signals from contiguous channels and other close communication satellites by selecting the property of waves to be received. A transmitting satellite dish sends a signal through horn while the dish focuses the signal into a narrow beam. Conversely, a receiving dish gathers the signal inward and focuses it towards the feed horn and into the controller.

The installation site must be 75 meters or 246 feet on or after the house and must be clear from signal obstructions. Also, think about the local building codes and possible microwave interferences from radio or television towers in the vicinity. Clay soil is a superb ground for installing the base. The base must be primarily installed. The base is a solid foundation that extends below the frost line where a concrete base tube is set. However, a slab increase installation is also considered to be a more stable method than a typical base foundation. It is essential for unstable sites to select the right installation of satellite dishes. The slab must be 1.6 square feet wide by 3.2 feet deep or 0.5 meters wide by 1 meter deep. After digging the soil to a correct depth, the concrete must poured a triangular steel and mount fixture that is embedded into the concrete. The platform is then attached to the triangular steel mount. A satellite dish must be cleaned twice a year. This is done by tightening and lubricating its bolts as well as trimming destructive weeds and trees around it. The arrangement of the dish should also be adjusted to correct bad reception.

Read More
Jan 27, 2011

Posted by | 0 Comments

The Major Concern in Design and Analysis of Satellite Link

Satellite links are used to deliver long distance telecommunications such as voice or data services, broadband internet services, television broadcast and communications with remote and hard to reach locations. Satellite link consists of an uplink and a downlink. Uplink connects ground station to satellite while downlink connects satellite to the receive ground station. Signal quality in the uplink depends on how powerful the signal is transmitted from the source ground station and how the satellite receives it. On the downlink side, signal quality depends on how powerful the satellite retransmits the signal and how the ground station receives it.

The main purpose of satellite link design is to maximize link data rate while reducing the BER (Bit Error Rate) at the receiver subjects to the constraint of received power and channel bandwidth. The BER of a satellite link is a function of Eb/No, which means energy per bit noise density ratio in the information channel. A satellite communications system designer must ensure a minimum Eb/No in the receiver channels to satisfy the link BER criteria which also meet the constraints on satellite transmit power and RF bandwidth. In digital transmission, Eb/No in a baseband channel relies on C/N (carrier to noise ratio) of the receiver, the type of modulation used in the baseband channel and the channel bandwidth. Hence, the major concern in design and analysis of satellite link is to calculate and evaluate the link C/N in which C is the received carrier power in the earth station/satellite and N is the noise plus interference (caused by earth stations of adjacent satellite) power in the receiver.

Rain is the major destruction of satellite signal. Rain attenuation is a function of rain rate at ground station location and satellite link carrier frequency. Average charge of rain rate (mm/hr) of a country can be obtained from the department of Meteorology of that country. Rain effects become stern at wavelength approach the rain drop size. So you have to ensure that the satellite link can overcome the maximum attenuation induced by the rain. Hence, accurate assessment needs to have evaluating link parameters.

Read More